Thermal Gel
  • LCE360T Post-curing 3.6 w/m·k one-part thermal conductive silicone gel
  • LCE360T.png
  • exec-4c794b35-93c2-419e-9cf8-9bd8dcf2ebc9 拷贝.jpg
  • IMG_2073.JPG
  • LCE360T Post-curing 3.6 w/m·k one-part thermal conductive silicone gel
  • LCE360T.png
  • exec-4c794b35-93c2-419e-9cf8-9bd8dcf2ebc9 拷贝.jpg
  • IMG_2073.JPG

LCE360T Post-curing 3.6 w/m·k one-part thermal conductive silicone gel

Specification:
Thermal Conductivity:3.6±0.3 W/m·K
Thermal Impedance:0.046 ℃·in²/W
Cure:100℃/60min
Extrusion Rate:≥200 g/min
BLT:≤30 μm
Hardness:50±10 Shore OO
Introduction:
LCE360T is a one-part, heat-curable thermal conductive silicone gel designed to fill gaps between heat-generating electronic components and heat sinks or cooling structures. With a thermal conductivity of 3.6 ± 0.3 W/m·K, it provides efficient heat transfer while maintaining electrical insulation.
  • Product introduction
  • Technical Parameters
  • Product Application
  • Product Characteristics

LCE360T One-Part Thermal Conductive Silicone Gel | 3.6 W/m·K


Heat-Curable Thermal Gap Filler for Electronic Thermal Management


LCE360T is a one-part, heat-curable thermal conductive silicone gel designed to fill gaps between heat-generating electronic components and heat sinks or cooling structures. With a thermal conductivity of 3.6 ± 0.3 W/m·K, it provides efficient heat transfer while maintaining electrical insulation.


The material supports automated dispensing and conforms to irregular surfaces and variable assembly gaps. After curing at 100°C for 60 minutes, it forms a soft elastomer that functions as a conformable thermal interface, providing pad-like performance with the processing flexibility of a dispensable material.


LCE360T helps improve surface contact, fill air gaps, and reduce thermal contact resistance. Its low assembly stress makes it suitable for pressure-sensitive components and electronic assemblies with dimensional variations.

Test Items

Unit

LCE360T

Test Standard

Appearance

-

Blue

Visual

Density

g/cm3

3.29±0.2

ASTM D792

Extrusion Rate

g/min

≥200

φ2.54mm/90psi

BLT

μm

≤30

-

Hardness

Shore OO

50±10

ASTM D2240

Dielectric Strength

KV/mm

≥8

ASTM D149

Volume Resistivity

Ω·cm

≥1×1013

ASTM D257

Weight Loss

%

≤0.3

150℃240H

Thermal Conductivity

W/m·K

3.6±0.3

ISO 22007-2

Thermal Conductivity

W/m·K

3.6±0.3

ASTM D5470(Three-Thickness Fit)

Thermal Impedance

℃·in²/W

0.046

ASTM D5470(0.1mm )

Thermal Impedance

℃·cm²/W

0.296

ASTM D5470(0.1mm )

Operating Temperature

℃

-40~150

-

Specific Heat Capacity

J/(g/K)

0.773

ASTM E1269


Features and Benefits

Efficient thermal transfer: Helps dissipate heat from electronic components to heat sinks and cooling structures.



Electrical insulation: Suitable for thermal interfaces requiring electrical isolation.


Low assembly stress: Conforms to mating surfaces while limiting mechanical stress on sensitive components.


Automated dispensing compatibility: One-part formulation simplifies material handling and supports automated production.


Gap-filling capability: Accommodates uneven surfaces and assembly tolerances to improve thermal contact.


Sag resistance: Helps maintain material placement after dispensing and before curing.


Temperature and vibration resistance: Supports stable thermal interfaces in demanding operating environments.



Typical Applications

Computing and Server Electronics

Thermal gap filling in CPU- and GPU-based assemblies, servers, and other high-heat electronic systems.


Power Electronics

Thermal interfaces for power modules, power semiconductors, and power amplifiers.


Telecommunications Equipment

Heat dissipation in communication base stations, 5G equipment, and networking systems.


Automotive Electronics

Thermal management for battery management systems (BMS), vehicle control modules, and other heat-generating electronic assemblies.


Test Items

Unit

LCE360T

Test Standard

Appearance

-

Blue

Visual

Density

g/cm3

3.29±0.2

ASTM D792

Extrusion Rate

g/min

≥200

φ2.54mm/90psi

BLT

μm

≤30

-

Hardness

Shore OO

50±10

ASTM D2240

Dielectric Strength

KV/mm

≥8

ASTM D149

Volume Resistivity

Ω·cm

≥1×1013

ASTM D257

Weight Loss

%

≤0.3

150℃240H

Thermal Conductivity

W/m·K

3.6±0.3

ISO 22007-2

Thermal Conductivity

W/m·K

3.6±0.3

ASTM D5470(Three-Thickness Fit)

Thermal Impedance

℃·in²/W

0.046

ASTM D5470(0.1mm )

Thermal Impedance

℃·cm²/W

0.296

ASTM D5470(0.1mm )

Operating Temperature

℃

-40~150

-

Specific Heat Capacity

J/(g/K)

0.773

ASTM E1269

Typical Applications

Computing and Server Electronics

Thermal gap filling in CPU- and GPU-based assemblies, servers, and other high-heat electronic systems.


Power Electronics

Thermal interfaces for power modules, power semiconductors, and power amplifiers.


Telecommunications Equipment

Heat dissipation in communication base stations, 5G equipment, and networking systems.


Automotive Electronics

Thermal management for battery management systems (BMS), vehicle control modules, and other heat-generating electronic assemblies.

Features and Benefits

Efficient thermal transfer: Helps dissipate heat from electronic components to heat sinks and cooling structures.



Electrical insulation: Suitable for thermal interfaces requiring electrical isolation.


Low assembly stress: Conforms to mating surfaces while limiting mechanical stress on sensitive components.


Automated dispensing compatibility: One-part formulation simplifies material handling and supports automated production.


Gap-filling capability: Accommodates uneven surfaces and assembly tolerances to improve thermal contact.


Sag resistance: Helps maintain material placement after dispensing and before curing.


Temperature and vibration resistance: Supports stable thermal interfaces in demanding operating environments.

Contact

Tel:+86-13691979380
+86-19065180554

E-mail:elvinlen@szutd.com
Carly@szutd.com

Address:8th Floor, Tower B, Lechuanghui Building, No. 1211 Guanguang Road, Longhua District, Shenzhen City, Guangdong Province