Thermal Gel
  • 8 W/m·K Single Part Thermal Gap Filler High Thermal Conductivity Thermal Gel
  • IMG_2060.JPG
  • LCE800 参数.png
  • EN-02-thermal 模板.png
  • EN-04-dispense 通用.png
  • 8 W/m·K Single Part Thermal Gap Filler High Thermal Conductivity Thermal Gel
  • IMG_2060.JPG
  • LCE800 参数.png
  • EN-02-thermal 模板.png
  • EN-04-dispense 通用.png

8 W/m·K Single Part Thermal Gap Filler High Thermal Conductivity Thermal Gel

Specification:
Thermal Conductivity:8.0±0.5 W/m·K
Thermal Impedance:0.040 ℃·in²/W
Extrusion Rate:≥30 g/min
BLT:≤200 μm
Operating Temperature:-40~150 ℃
Introduction:
LCE800 single part thermal gap filler offers 8.0 ± 0.5 W/m·K thermal conductivity, electrical insulation, and low-pressure gap filling. No mixing required.
  • Product introduction
  • Technical Parameters
  • Product Application
  • Product Characteristics

LCE800 Single Part Thermal Gap Filler | 8 W/m·K Silicone Thermal Gel

LCE800 is a single part thermal gap filler formulated with silicone for thermal management in high-power electronic devices. With a thermal conductivity of 8.0 ± 0.5 W/m·K, this high thermal conductivity silicone thermal gel provides efficient heat transfer between heat-generating components and heat sinks or enclosures.


Its soft, paste-like consistency allows it to conform to gaps and establish effective thermal contact under low pressure. Ready to use without mixing, LCE800 simplifies material preparation and application. It combines thermal conductivity, good electrical insulation, and thermal stability to support efficient cooling and long-term, stable device operation.

Technical Specifications

Test Items

Unit

LCE800

Test Standard

Appearance

-

Gray

Visual

Density

g/cm3

3.50±0.2

ASTM D792

Extrusion Rate

g/min

≥40

φ2.54mm/90psi

BLT

μm

≤200

-

Dielectric Strength

KV/mm

≥6

ASTM D149

Volume Resistivity

Ω·cm

≥1×1011

ASTM D257

Weight Loss

%

≤0.5

150℃240H

Thermal Conductivity

W/m·K

8.0±0.5

ISO 22007-2

Thermal Conductivity

W/m·K

8.0±0.5

ASTM D5470(Three-Thickness Fit)

Thermal Impedance

℃·in²/W

0.040

ASTM D5470(0.1mm )

Thermal Impedance

℃·cm²/W

0.257

ASTM D5470(0.1mm )

Operating Temperature

℃

-40~150

-

Specific Heat Capacity

J/(g/K)

0.760

ASTM E1269

Features and Advantages


High thermal conductivity: Delivers 8.0 ± 0.5 W/m·K thermal conductivity for efficient heat transfer in high-power electronic devices.
Low-pressure gap filling: The soft, conformable gel fills gaps between electronic components and heat sinks or enclosures.
Single-component convenience: Requires no mixing and is ready to use, simplifying handling and application.
Electrical insulation: Provides heat conduction while maintaining good electrical insulation.
Wide operating temperature range: Operates from -40 to 150 °C, supporting thermal management across varying temperature conditions.


Thermal Management Applications


LCE800 silicone thermal gel is suitable for electronic assemblies requiring both thermal conduction and gap filling. It provides a thermal interface between heat-generating components and cooling surfaces, making it a practical material option for high-power devices that require efficient heat transfer under low assembly pressure.



Test Item
Unit LCE700 Test Methods
Color
- Gray
Visually
Specific Gravity
g/cc
3.5 ASTM D792
Extrusion Rate
g/min
≥10
φ2.54mm 90psi
Thickness After Compression
mm
0.2
-
Weight Loss
% ≤0.2
@150℃240H
Breakdown Voltage
KV/mm
≥5
ASTM D149
Volume Resistivity
Ω·cm
1×1011
ASTM D257
Continuous Use Temp
℃
-40~150
-
Thermal Conductivity
W/m·K
7.0 ISO 22007-2
Thermal impedance
℃·in2 /W
0.023
ASTM D5470
Wireless electronic equipment
Communication electronic hardware equipment
Automotive electronic application equipment
Chassis or related heat dissipation module
Host or small office network equipment
Microprocessors, memory chips and graphics processors
High thermal conductivity, low thermal resistance, good wettability
No settlement, no flow, can fill any uneven gap
Soft, no stress, can be compressed to 0.1 mm thin
The design and application are convenient, and the automatic dispensing can adjust the size of any thickness

Contact

Tel:+86-13691979380
+86-19065180554

E-mail:elvinlen@szutd.com
Carly@szutd.com

Address:8th Floor, Tower B, Lechuanghui Building, No. 1211 Guanguang Road, Longhua District, Shenzhen City, Guangdong Province