LCE300 is a silicone-based, one component thermally conductive gel with a thermal conductivity of 3 W/m·K, designed for thermal management in electronic devices and electrical components. Its soft, paste-like consistency allows it to fill gaps between heat-generating components and heat sinks or enclosures, providing efficient heat transfer under low pressure.
This ready-to-use heat conductive gel requires no mixing and offers good thermal stability and electrical insulation. Suitable for applications requiring both heat conduction and gap filling, LCE300 supports effective cooling and long-term, stable device operation.
For businesses seeking a one component thermal gel supplier, LCE300 offers a ready-to-use material option for a wide range of electronic thermal management applications.
Test Item
Unit
LCE300
Test Methods
Color
-
Pink
Visually
Specific Gravity
g/cc
3.37
ASTM D792
Extrusion Rate
g/min
≥40
φ2.54mm 90psi
Thickness After Compression
mm
0.1
-
Weight Loss
%
≤0.3
@150℃240H
Breakdown Voltage
KV/mm
≥7
ASTM D149
Volume Resistivity
Ω·cm
1×1013
ASTM D257
Continuous Use Temp
℃
-40~150
-
Thermal Conductivity
W/m·K
3.0
ISO 22007-2
Thermal impedance
℃·in2 /W
0.058
ASTM D5470
Solar photovoltaic modules: Provides thermal conduction in solar photovoltaic applications.
|
Test Item |
Unit | LCE300 | Test Methods |
|
Color |
- |
Pink |
Visually |
|
Specific Gravity |
g/cc |
3.37 |
ASTM D792 |
|
Extrusion Rate |
g/min |
≥40 |
φ2.54mm 90psi |
|
Thickness After Compression |
mm |
0.1 |
- |
|
Weight Loss |
% |
≤0.3 |
@150℃240H |
|
Breakdown Voltage |
KV/mm |
≥7 |
ASTM D149 |
|
Volume Resistivity |
Ω·cm |
1×1013 |
ASTM D257 |
|
Continuous Use Temp |
℃ |
-40~150 |
- |
|
Thermal Conductivity |
W/m·K |
3.0 |
ISO 22007-2 |
|
Thermal impedance |
℃·in2 /W |
0.058 |
ASTM D5470 |
Tel:+86-13691979380
+86-19065180554
E-mail:elvinlen@szutd.com
Carly@szutd.com
Address:8th Floor, Tower B, Lechuanghui Building, No. 1211 Guanguang Road, Longhua District, Shenzhen City, Guangdong Province