Thermal Insulation Materials
  • 1.3 W/m·K 0.15mm Thickness Polyimide Film Insulating Silicone Thermal Pad
  • LCK10 参数.png
  • LCV350S-Custom-Sizes-and-Die-Cutting-Yellow.png
  • exec-73eadcc7-0c41-4554-ba34-34ac30c0b5f7 拷贝.jpg
  • fiberglass-reinforced-structure-v2 拷贝.jpg
  • heat-transfer-electrical-insulation 拷贝.jpg
  • 1.3 W/m·K 0.15mm Thickness Polyimide Film Insulating Silicone Thermal Pad
  • LCK10 参数.png
  • LCV350S-Custom-Sizes-and-Die-Cutting-Yellow.png
  • exec-73eadcc7-0c41-4554-ba34-34ac30c0b5f7 拷贝.jpg
  • fiberglass-reinforced-structure-v2 拷贝.jpg
  • heat-transfer-electrical-insulation 拷贝.jpg

1.3 W/m·K 0.15mm Thickness Polyimide Film Insulating Silicone Thermal Pad

Specification:
LCK10Polyimide Film Thermally Conductive Insulating Silicone Thermal Pad
Thermal conductivity:1.3 W/m·K
Thickness:0.15 mm
Breakdown Voltage:≥8 KV
Thermal Impedance:0.3 ℃·in²/W
Operating Temperature:-60~180℃
Custom Sizes & Die Cutting Supported
Introduction:
LCK-10 is a kind of high performance insulating material coated with silicone rubber based on polyimide film, which has excellent puncture resistance and excellent thermal conductivity.
LCK-10 is an electrically insulating silicone thermal pad with 1.3 W/(m·K) thermal conductivity and ≥8 kV breakdown voltage. Custom die cutting available.
  • Product introduction
  • Technical Parameters
  • Product Application
  • Product Characteristics


1.3 W/m·K 0.15mm Thickness Polyimide Film Insulating Silicone Thermal Pad


LCK-10 is a kind of high performance insulating material coated with silicone rubber based on polyimide film, which has excellent puncture resistance and excellent thermal conductivity. 



LCK-10 is specially designed as a substitute for ceramic insulators such as beryllium oxide, boron nitride and bauxite. Ceramic insulator is more expensive and easy to damage. In contrast, LCK-10 is not easy to be damaged and has lower cost.


LCK-10 is an electrically insulating silicone thermal pad with 1.3 W/(m·K) thermal conductivity and ≥8 kV breakdown voltage. Custom die cutting available.

Test Items

Unit

LCK-10

Test Standard

Material Quality

 

Silicone + polyimide film

 

Appearance

-

Yellow

Visual

Thickness

mm

0.15±0.02

ASTM D374/374M

Hardness

Shore A

90±5

ISO 48-4

Density

g/cm³

1.4±0.2

ASTM D792

Breaking Force

N/25mm

≥100

ASTM D5035

Breakdown Voltage

KV

≥8

ASTM D149

Volume Resistivity

Ω·cm

≥1×1014

ASTM D257

Thermal Conductivity

W/m·K

1.3±0.1

ASTM D5470

Thermal Impedance

℃·in²/W

0.3

ASTM D5470 (40psi)

Thermal Impedance

℃·cm²/W

1.935

ASTM D5470 (40psi)

Flammability

Grade

V-0

UL94

Operating Temperature

℃

-60~180

-


Key Features


Puncture-resistant construction — The polyimide film provides puncture resistance during handling and assembly.
Non-adhesive on both sides — The pad is easy to position during assembly and remove during servicing.
Alternative to rigid ceramic insulators — The film-based pad can be used in designs where it meets the assembly’s thermal, electrical, and mechanical requirements.



Typical Applications


MOSFETs and IGBTs — Thin, electrically insulating interface between power devices and heat sinks.
LED driver circuits — Heat transfer in compact drivers with limited mounting clearance.
Automotive ECUs and BMS modules — Electrically insulated heat transfer from power components to a heat sink or housing.
Transformers and inverters — Thermal management in power supply modules and energy storage inverters.

Motor controls and home appliances — Thermal interfaces for motor drives and appliance power electronics.



Custom Sizes and Die Cutting

Custom dimensions and die-cut shapes are available. Send your required dimensions or a part drawing to request a quote.



Reliable thermal performance starts with the right materials.

With 15 years of expertise, Union Tenda provides thermal interface materials tailored to your applications—from thermal pads and gels to greases, potting compounds and phase change materials. Our in-house R&D and testing capabilities, backed by a 20,000 m² production base, support customers across electronics, AI, EVs and energy storage.

Let's connect to discuss your thermal management needs.

Test Items

Unit

LCK-10

Test Standard

Material Quality

 

Silicone + polyimide film

 

Appearance

-

Yellow

Visual

Thickness

mm

0.15±0.02

ASTM D374/374M

Hardness

Shore A

90±5

ISO 48-4

Density

g/cm³

1.4±0.2

ASTM D792

Breaking Force

N/25mm

≥100

ASTM D5035

Breakdown Voltage

KV

≥8

ASTM D149

Volume Resistivity

Ω·cm

≥1×1014

ASTM D257

Thermal Conductivity

W/m·K

1.3±0.1

ASTM D5470

Thermal Impedance

℃·in²/W

0.3

ASTM D5470 (40psi)

Thermal Impedance

℃·cm²/W

1.935

ASTM D5470 (40psi)

Flammability

Grade

V-0

UL94

Operating Temperature

℃

-60~180

-

Automotive electronic heating module
Heating power device
Power supply module
Home appliances / motor control
Military electronics / thermal semiconductor
High thermal conductivity and low thermal resistance
It can withstand high voltage up to 8kv
No stickiness on both sides, easy to operate and disassemble
It can replace ceramic insulator

Contact

Tel:+86-13691979380
+86-19065180554

E-mail:elvinlen@szutd.com
Carly@szutd.com

Address:8th Floor, Tower B, Lechuanghui Building, No. 1211 Guanguang Road, Longhua District, Shenzhen City, Guangdong Province